BI3MS16-Measurement Systems

Module Provider: School of Biological Sciences
Number of credits: 10 [5 ECTS credits]
Level:6
Terms in which taught: Autumn and Spring (Double presentation)
Pre-requisites: SE2SD11 Sensors and Devices
Non-modular pre-requisites:
Co-requisites:
Modules excluded:
Current from: 2019/0

Module Convenor: Dr John Bowen

Email: j.bowen@reading.ac.uk

Type of module:

Summary module description:

This module will give you the knowledge to design measurement systems to give the best possible performance for a wide variety of applications. It will also give you the ability to analyse the performance of measurement systems so that you can calculate their responsivity and detectivity. While much of the material is of general applicability to all types of measurement systems, the specific areas of ultrasonic measurement systems and pyrometry and radiometry will be covered in detail. The module is practically-based, with three laboratory practicals, which take place during the Spring Term, following the series of lectures which take place in the Autumn Term. Assessment is via an open book exam (70%) and the three practical reports (30%).

Aims:
This module aims to describe measurement systems and their application

Assessable learning outcomes:
By the end of the module the student should be able to design measurement systems and calculate their responsivity and detectivity.

Additional outcomes:

Outline content:
Measurement Systems: General measurement system and examples. Parameters characterising measurement systems. Principles of system design. Noise in passive networks and amplifiers. Noise figure & its measurement. Noise matching and noise equivalent circuits. Detection, phase sensitive detectors & applications. Ultrasonic measurement systems. Pyrometry and radiometry.

Brief description of teaching and learning methods:
The module comprises 2 lectures per week, laboratory practicals and a revision tutorial.

Contact hours:

Ìý	Autumn	Spring	Summer
Lectures	20
Tutorials			1
Practicals classes and workshops		12
Guided independent study:	65		2
Ìý	Ìý	Ìý	Ìý
Total hours by term	32		1
Ìý	Ìý	Ìý	Ìý
Total hours for module	100

Summative Assessment Methods:

Method	Percentage
Written exam	70
Set exercise	30

Summative assessment- Examinations:
One 2-hour examination paper in May/June.

Summative assessment- Coursework and in-class tests:

Formative assessment methods:

Penalties for late submission:
The Module Convener will apply the following penalties for work submitted late:

where the piece of work is submitted after the original deadline (or any formally agreed extension to the deadline): 10% of the total marks available for that piece of work will be deducted from the mark for each working day[1] (or part thereof) following the deadline up to a total of five working days;

where the piece of work is submitted more than five working days after the original deadline (or any formally agreed extension to the deadline): a mark of zero will be recorded.

The University policy statement on penalties for late submission can be found at:
You are strongly advised to ensure that coursework is submitted by the relevant deadline. You should note that it is advisable to submit work in an unfinished state rather than to fail to submit any work.

Assessment requirements for a pass:
40%

Reassessment arrangements:
Examination only.
One 2-hour examination paper in August/September.

Additional Costs (specified where applicable):
1) Required text books:
2) Specialist equipment or materials:
3) Specialist clothing, footwear or headgear:
4) Printing and binding:
5) Computers and devices with a particular specification:
6) Travel, accommodation and subsistence:

Last updated: 8 April 2019